Blood plasma is the liquid component of blood, in which the blood cells are suspended. It makes up about 55% of total blood volume. It is composed of mostly water (90% by volume), and contains dissolved proteins, glucose, clotting factors, mineral ions, hormones and carbon dioxide (plasma being the main medium for excretory product transportation). Blood plasma is prepared simply by spinning a tube of fresh blood in a centrifuge until the blood cells fall to the bottom of the tube. The blood plasma is then poured or drawn off. Blood serum is blood plasma without fibrinogen or the other clotting factors.
Thursday, October 30, 2008
Wednesday, October 22, 2008
Photomultiplier
Photomultiplier tubes (photomultipliers or PMTs for short), members of the class of vacuum tubes, and more specifically phototubes, are extremely sensitive detectors of light in the ultraviolet, visible, and near-infrared ranges of the electromagnetic spectrum. These detectors multiply the signal produced by incident light by as much as 100 million times (i.e., 160 dB), enabling (for example) single photons to be detected individually when the incident flux of light is very low.
The combination of high gain, low noise, high frequency response, and large area of collection has earned photomultipliers an essential place in nuclear and particle physics, astronomy, medical diagnostics including blood tests, medical imaging, motion picture film scanning (telecine), and high-end image scanners known as drum scanners. Semiconductor devices, particularly avalanche photodiodes, are alternatives to photomultipliers; however, photomultipliers are uniquely well-suited for applications requiring low-noise, high-sensitivity detection of light that is imperfectly collimated. While photomultipliers are extraordinarily sensitive and moderately efficient, research is still underway to create a photon-counting light detection device that is much more than 99% efficient. Such a detector is of interest for applications related to quantum information and quantum cryptography. Elements of photomultiplier technology, when integrated differently, are the basis of night vision devices.
The combination of high gain, low noise, high frequency response, and large area of collection has earned photomultipliers an essential place in nuclear and particle physics, astronomy, medical diagnostics including blood tests, medical imaging, motion picture film scanning (telecine), and high-end image scanners known as drum scanners. Semiconductor devices, particularly avalanche photodiodes, are alternatives to photomultipliers; however, photomultipliers are uniquely well-suited for applications requiring low-noise, high-sensitivity detection of light that is imperfectly collimated. While photomultipliers are extraordinarily sensitive and moderately efficient, research is still underway to create a photon-counting light detection device that is much more than 99% efficient. Such a detector is of interest for applications related to quantum information and quantum cryptography. Elements of photomultiplier technology, when integrated differently, are the basis of night vision devices.
Monday, October 13, 2008
Digital Marketing – Pull
Pros:
No restrictions in terms of type of content or size as the user determines what they want.
Cons:
Pull digital marketing technologies involve the user having to seek out and directly grab (or pull) the content. Web site/blogs and streaming media (audio and video) are good examples of this. In each of these examples, users have a specific link (URL) to view the content.
Pros:
No restrictions in terms of type of content or size as the user determines what they want.
- No technology required to send the content, only to store/display it.
- No regulations or opt-in process required.
Cons:
- Considerable marketing effort required for users to find the message/content.
- Limited tracking capabilities – only total downloads, page views, etc.
- No personalization – content is received and viewed the same across all audiences
Thursday, October 02, 2008
Photogeneration of charge carriers
When a photon hits a piece of silicon, one of three things can happen:
When a photon is absorbed, its energy is given to an electron in the crystal lattice. Usually this electron is in the valence band, and is tightly bound in covalent bonds between neighboring atoms, and hence unable to move far. The energy given to it by the photon "excites" it into the conduction band, where it is free to move around within the semiconductor. The covalent bond that the electron was previously a part of now has one fewer electron — this is known as a hole. The presence of a missing covalent bond allows the bonded electrons of neighboring atoms to move into the "hole," leaving another hole behind, and in this way a hole can move through the lattice. Thus, it can be said that photons absorbed in the semiconductor create mobile electron-hole pairs.
A photon need only have greater energy than that of the band gap in order to excite an electron from the valence band into the conduction band. However, the solar frequency spectrum approximates a black body spectrum at ~6000 K, and as such, much of the solar radiation reaching the Earth is composed of photons with energies greater than the band gap of silicon. These higher energy photons will be absorbed by the solar cell, but the difference in energy between these photons and the silicon band gap is converted into heat (via lattice vibrations — called phonons) rather than into usable electrical energy.
- the photon can pass straight through the silicon — this (generally) happens for lower energy photons,
- the photon can reflect off the surface,
- the photon can be absorbed by the silicon, if the photon energy is higher than the silicon band gap value. This generates an electron-hole pair and sometimes heat, depending on the band structure.
When a photon is absorbed, its energy is given to an electron in the crystal lattice. Usually this electron is in the valence band, and is tightly bound in covalent bonds between neighboring atoms, and hence unable to move far. The energy given to it by the photon "excites" it into the conduction band, where it is free to move around within the semiconductor. The covalent bond that the electron was previously a part of now has one fewer electron — this is known as a hole. The presence of a missing covalent bond allows the bonded electrons of neighboring atoms to move into the "hole," leaving another hole behind, and in this way a hole can move through the lattice. Thus, it can be said that photons absorbed in the semiconductor create mobile electron-hole pairs.
A photon need only have greater energy than that of the band gap in order to excite an electron from the valence band into the conduction band. However, the solar frequency spectrum approximates a black body spectrum at ~6000 K, and as such, much of the solar radiation reaching the Earth is composed of photons with energies greater than the band gap of silicon. These higher energy photons will be absorbed by the solar cell, but the difference in energy between these photons and the silicon band gap is converted into heat (via lattice vibrations — called phonons) rather than into usable electrical energy.
Subscribe to:
Comments (Atom)